American NauticsAmerican Nautics
Construit pentru explorare cu confort, motorul Diesel Mercury 3.0L, lin și liniștit, îți va schimba așteptările despre cum se simte performanța diesel.
| Power mhp / kW | 270 |
| Bore and stroke | 3.27 x 6.62" / 83 x 92 mm |
| Maximum RPM (WOT) | 4200 |
| Engine type | V6 |
| Displacement (L) | 3.0L |
| Dry Weight (engine only) | 358 Kg (789 lbs) |
| Dimensions (L x W x H) | 36.7 x 33.4 x 32.0" / 847 x 849 x 813 mm |
| Peak Torque | 594 Nm @ 2200 rpm |
| Air Handling | Turbocharged and Aftercooled |
| Fuel System | High pressure common rail |
| Rotation | Counter clockwise facing flywheel |
| Compression Ratio | 16.5:1 |
| Fuel Pre-filtration requirement | Not required |
| Fuel lift pump | On engine |
| High pressure fuel pump | Bosch CP 4.2 w/ integrated gear lift pump |
| Valves per Cylinder | 4 |
| Pistons | Oil jet cooled |
| Fuel injectors | Bosch CRS 2.20 (Solenoid) |
| Glow Plugs | Standard equipment with Bosch glow plug control unit (GCU) |
| Air inlet (Starboard Rear) | Filtered and silenced |
| Turbocharger | Honeywell VGT |
| Engine and turbocharger cooling | Closed cooled |
| Coolers | Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell |
| Seawater pump inlet size | 38 mm (1.5 in) |
| Oil sump volume | 8.5 L |
| Dipstick range | 1.0 L |
| Oil maintenance interval | 200 hours or annually |
| Coolant Volume | 12 L |
| Flywheel size | 290 mm (11.42 in) SAE 8 |
| Electrical system | 12 V, 110 A w/ conveniently located battery power and ground studs |
| MerCathode (Sterndrive only) | Engine mounted |
| Engine Stop | ECU Controlled |
| Engine Control Unit (ECU) | Bosch EDC17 |
| Sensors | Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure |
| Throttle and shift | Mercury DTS or Mechanical Cable |
| Helm and gauge compatibility | Mercury SmartCraft |
| Mercury Joystick Piloting | Compatible with Joystick Piloting for Sterndrives (Axius) |
| Sterndrive: Mercury Bravo One X | 1.36, 1.5, 1.65 |
| Sterndrive: Mercury Bravo One X SeaCore | 1.36, 1.50, 1.65 |
| Sterndrive: Mercury Bravo One XR | 1.35, 1.50 |
| Sterndrive: Mercury Bravo Two X | 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Two X SeaCore | 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Two XR | 1.65 |
| Sterndrive: Mercury Bravo Three X | 1.36, 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three X SeaCore | 1.36, 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three XR | 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three XR SeaCore | 1.65, 1.81 |
| Weight (engine only) | 358 Kg (789 lbs) |
| Power mhp / kW | 270 |
| Bore and stroke | 3.27 x 6.62" / 83 x 92 mm |
| Maximum RPM (WOT) | 4200 |
| Engine type | V6 |
| Displacement (L) | 3.0L |
| Dry Weight (engine only) | 348 Kg (767 lbs) |
| Dimensions (L x W x H) | 36.6 x 33.5 x 30.0" / 931 x 851 x 784 mm |
| Peak Torque | 594 Nm @ 2200 rpm |
| Air Handling | Turbocharged and Aftercooled |
| Fuel System | High pressure common rail |
| Rotation | Counter clockwise facing flywheel |
| Compression Ratio | 16.5:1 |
| Fuel Pre-filtration requirement | Not required |
| Fuel lift pump | On engine |
| High pressure fuel pump | Bosch CP 4.2 w/ integrated gear lift pump |
| Valves per Cylinder | 4 |
| Pistons | Oil jet cooled |
| Fuel injectors | Bosch CRS 2.20 (Solenoid) |
| Glow Plugs | Standard equipment with Bosch glow plug control unit (GCU) |
| Air inlet (Starboard Rear) | Filtered and silenced |
| Turbocharger | Honeywell VGT |
| Engine and turbocharger cooling | Closed cooled |
| Coolers | Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell |
| Seawater pump inlet size | 38 mm (1.5 in) |
| Oil sump volume | 8.5 L |
| Dipstick range | 1.0 L |
| Oil maintenance interval | 200 hours or annually |
| Coolant Volume | 12 L |
| Flywheel size | 290 mm (11.42 in) SAE 8 |
| Electrical system | 12 V, 110 A w/ conveniently located battery power and ground studs |
| MerCathode (Sterndrive only) | Engine mounted |
| Engine Stop | ECU Controlled |
| Engine Control Unit (ECU) | Bosch EDC17 |
| Sensors | Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure |
| Throttle and shift | Mercury DTS or Mechanical Cable |
| Helm and gauge compatibility | Mercury SmartCraft |
| Mercury Joystick Piloting | Compatible with Joystick Piloting for Sterndrives (Axius) |
| Sterndrive: Mercury Bravo One X | 1.36, 1.5, 1.65 |
| Sterndrive: Mercury Bravo One X SeaCore | 1.36, 1.50, 1.65 |
| Sterndrive: Mercury Bravo One XR | 1.35, 1.50 |
| Sterndrive: Mercury Bravo Two X | 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Two X SeaCore | 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Two XR | 1.65 |
| Sterndrive: Mercury Bravo Three X | 1.36, 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three X SeaCore | 1.36, 1.50, 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three XR | 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three XR SeaCore | 1.65, 1.81 |
| Weight (engine only) | 358 Kg (789 lbs) |
| Power mhp / kW | 230 |
| Bore and stroke | 3.27 x 6.62" / 83 x 92 mm |
| Maximum RPM (WOT) | 4200 |
| Engine type | V6 |
| Displacement (L) | 3.0L |
| Dry Weight (engine only) | 358 Kg (789 lbs) |
| Dimensions (L x W x H) | 36.7 x 33.4 x 32.0" / 847 x 849 x 813 mm |
| Peak Torque | 503 Nm @ 2200 rpm |
| Air Handling | Turbocharged and Aftercooled |
| Fuel System | High pressure common rail |
| Rotation | Counter clockwise facing flywheel |
| Compression Ratio | 16.5:1 |
| Fuel Pre-filtration requirement | Not required |
| Fuel lift pump | On engine |
| High pressure fuel pump | Bosch CP 4.2 w/ integrated gear lift pump |
| Valves per Cylinder | 4 |
| Pistons | Oil jet cooled |
| Fuel injectors | Bosch CRS 2.20 (Solenoid) |
| Glow Plugs | Standard equipment with Bosch glow plug control unit (GCU) |
| Air inlet (Starboard Rear) | Filtered and silenced |
| Turbocharger | Honeywell VGT |
| Engine and turbocharger cooling | Closed cooled |
| Coolers | Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell |
| Seawater pump inlet size | 38 mm (1.5 in) |
| Oil sump volume | 8.5 L |
| Dipstick range | 1.0 L |
| Oil maintenance interval | 200 hours or annually |
| Coolant Volume | 12 L |
| Flywheel size | 290 mm (11.42 in) SAE 8 |
| Electrical system | 12 V, 110 A w/ conveniently located battery power and ground studs |
| MerCathode (Sterndrive only) | Engine mounted |
| Engine Stop | ECU Controlled |
| Engine Control Unit (ECU) | Bosch EDC17 |
| Sensors | Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure |
| Throttle and shift | Mercury DTS or Mechanical Cable |
| Helm and gauge compatibility | Mercury SmartCraft |
| Mercury Joystick Piloting | Compatible with Joystick Piloting for Sterndrives (Axius) |
| Sterndrive: Mercury Bravo One X | 1.36, 1.5, 1.65 |
| Sterndrive: Mercury Bravo One X SeaCore | 1.36, 1.50, 1.65 |
| Sterndrive: Mercury Bravo One XR | 1.35, 1.50 |
| Sterndrive: Mercury Bravo Two X | 1.50, 1.65, 1.81, 2.00, 2.20 |
| Sterndrive: Mercury Bravo Two X SeaCore | 1.50, 1.65, 1.81, 2.00, 2.20 |
| Sterndrive: Mercury Bravo Two XR | 1.65 |
| Sterndrive: Mercury Bravo Three X | 1.36, 1.50, 1.65, 1.81, 2.00, 2.20 |
| Sterndrive: Mercury Bravo Three X SeaCore | 1.36, 1.50, 1.65, 1.81, 2.00, 2.20 |
| Sterndrive: Mercury Bravo Three XR | 1.65, 1.81, 2.00 |
| Sterndrive: Mercury Bravo Three XR SeaCore | 1.65, 1.81 |
| Power mhp / kW | 230 |
| Bore and stroke | 3.27 x 6.62" / 83 x 92 mm |
| Maximum RPM (WOT) | 4200 |
| Engine type | V6 |
| Displacement (L) | 3.0L |
| Dry Weight (engine only) | 348 Kg (767 lbs) |
| Dimensions (L x W x H) | 36.6 x 33.5 x 30.0" / 931 x 851 x 784 mm |
| Peak Torque | 503 Nm @ 2200 rpm |
| Air Handling | Turbocharged and Aftercooled |
| Fuel System | High pressure common rail |
| Rotation | Counter clockwise facing flywheel |
| Compression Ratio | 16.5:1 |
| Fuel Pre-filtration requirement | Not required |
| Fuel lift pump | On engine |
| High pressure fuel pump | Bosch CP 4.2 w/ integrated gear lift pump |
| Valves per Cylinder | 4 |
| Pistons | Oil jet cooled |
| Fuel injectors | Bosch CRS 2.20 (Solenoid) |
| Glow Plugs | Standard equipment with Bosch glow plug control unit (GCU) |
| Air inlet (Starboard Rear) | Filtered and silenced |
| Turbocharger | Honeywell VGT |
| Engine and turbocharger cooling | Closed cooled |
| Coolers | Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell |
| Seawater pump inlet size | 38 mm (1.5 in) |
| Oil sump volume | 8.5 L |
| Dipstick range | 1.0 L |
| Oil maintenance interval | 200 hours or annually |
| Coolant Volume | 12 L |
| Flywheel size | 290 mm (11.42 in) SAE 8 |
| Electrical system | 12 V, 110 A w/ conveniently located battery power and ground studs |
| Engine Stop | ECU Controlled |
| Engine Control Unit (ECU) | Bosch EDC17 |
| Sensors | Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure |
| Throttle and shift | Mercury DTS or Mechanical Cable |
| Helm and gauge compatibility | Mercury SmartCraft |
| Mercury Joystick Piloting | Compatible with Joystick Piloting for Inboards |
| Inboard: ZF 63A | 1.21, 1.56, 2.03, 2.52, 2.68 |
| Inboard: ZF 63 | 1.25, 1.75, 2.78 |
| Inboard: ZF 68IV | 1.29, 1.56, 1.99 |
| Inboard: ZF 45C | 1 |